Products

Adtec

Encoder-Modulator

I) EN-80/81 HD Multi-CODEC Encoder/Modulator

The EN80/81 is a multi-CODEC low delay MPEG 2 and MPEG 4 AVC/H.264 high definition encoder/modulator. The EN81 is the global benchmark for DSNG, Tier One Contribution and trunking for Teleports, OB Vans and fiber operators globally. Its video support includes SD, 2D-HD and 3D AVC 422 with support for MPEG 2, sixteen channels of phase aligned audio, robust VBI support. The EN81 pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0 and 5.1).

The EN81 encodes and concurrently transports services via ASI, IP and DVBS/S2. The DVBS/S2 modulator is available in IF or L-band with modulation modes ranging from QPSK up to 32APSK.

The EN-40 DSNG encoder/modulator supports standard definition MPEG 2 and MPEG 4 AVC/H.264 with 420 and 422 chroma sampling. It boasts four pairs of stereo audio including MPEG 1 Layer 2 and Dolby AC3 audio encoding. Pass-through support includes PCM and DolbyE/2.0/5.1. The EN-40 supports redundant AC or DC dual-power supplies, enhanced control and monitoring via SNMP and browser. The EN-40 allows concurrent encoding and streaming to IP, ASI and L-Band. The optional Newtec DVBS/S2 modulator supports modulation from QPSK up to 32APSK.

The EN91 is a ultra-low delay MPEG 4 AVC/H.264 high definition encoder. The ultra-low delay mode requires the use of Adtec’s RD60 IRD and delivers picture-to-picture services in 100 milliseconds; MPEG 4 AVC/H.264 is significantly more efficient than JPEG making it the CODEC of choice for multiplexed and bandwidth sensitive applications. Its video support includes SD, 2D-HD and 3D AVC 422, sixteen channels of phase aligned audio, robust VBI support, the EN91 pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0 and 5.1).

The EN91 encodes and concurrently transports services via ASI, IP and DVBS/S2. The DVBS/S2 modulator is available in IF or L-band with modulation modes ranging from QPSK up to 32APSK.

The mediaHUB-Pro 02 is a real-time Contribution-quality MPEG 2 Standard and High Definition encoder. The Studio version of the mediaHUB-Pro 02 encodes Cable Labs VOD and DPI compliant MPEG 2 Transport Streams. It boasts dual stream on-board audio encoding of MPEG 1 Layer 2 audio including support for Dolby E and Dolby 5.1 pass-through. Standard Adtec transport interfaces include three ASI copper outputs with included support for transport over GIGE. Audio inputs include AES3 Digital Audio, SDI and Analog audio. BISS 1 and BISS E encryption is an option that can be field activated with a simple software key, no hardware required. Unique features of the Studio version include a built-in confidence decoder with HD/SD-SDI, HDMI and D1 outputs.

Receiver-Decoder

I) RD-60 Integrated Receiver/Decoder

The RD60 is a multi-CODEC ultra-low, low and normal delay MPEG 2 and MPEG 4 AVC/H.264 high definition IRD. The ultra-low delay mode requires the use of Adtec’s EN91 and delivers picture-to-picture services in 100 milliseconds; the low and normal delay modes are supported by both the EN91 and EN81. The RD60 is interoperable with other encoders making it ideal for mission critical trunking, ad-hock OB, DSNG and teleport applications.

Its video support includes SD, 2D-HD and 3D AVC 422, sixteen channels of phase aligned audio, robust VBI support and reliability. The RD60 pass-through support includes PCM, DolbyE (16 and 20 Bit) and Dolby AC3 (2.0 and 5.1).

The RD60 RD IRD identifies services concurrently from ASI, IP and DVBS/S2 transport interfaces. The DVBS/S2 de-modulator supports modes ranging from QPSK up to 32APSK.

The Soloist-HD Pro is a broadcast quality High Definition MPEG 2 and AVC decoder. The Soloist-HD Pro supports GIGE and Hard Drive Transport Stream decoding. Video outputs include D1(composite), HDMI with HDCP and HD-SDI with embedded audio. Decode MPEG 2 SD 422, HD 420, AVC SD and HD video. Audio decoding includes a single stereo channel of Dolby Digital, Dolby 5.1*, MPEG 1 Layer 2 and AAC-LC audio. Output broadcast quality video with embedded stereo audio on the HD-SDI interface and to consumer monitors with the HDMI interface. Composite D1 video and balanced analog audio are also supported for legacy NTSC or PAL environments. The decoder can down convert HD 1080i or 720 P to Composite or SDI.

Multiplexer

I) DTA-3050

Digital television service operators wishing to aggregate and process MPEG, ATSC, Digicypher, or DVB based services for traditional (satellite, cable, terrestrial) services will find the DTA ideal. It boasts 10 ASI inputs. Each supporting wire speed, a three-way mirrored ASI output, GIGE, and optional SMPTE-310.The DTA-3050 is IPTV and BBTV ready today; it supports multicast and unicast configurations including SPTS/UDP, MPTS/UDP, MPEG and DVB tables. Encryption support includes DVB-CSA with Ethernet Simulcrypt, AES for use with Simulcrypt compatible Conditional Access management Servers (CAS) vendors.

Professional Playback Solutions

I) edje® 4111 (Media Player / Decoder)

The edje 4111 HD is a digital media player for AVC/H.264 and MPEG 2 high and standard definition file playback and IP stream decoding. Whatever your source, the edje 4111 HD can automatically scale the content to match your output target up to 1080P60 for outstanding HD playback. The edje 4111 can easily be configured using the included web-based control application and front panel menu.

The signEdje is a digital media player for AVC/H.264 and MPEG 2 high and standard definition file playback and IP stream decoding. Whatever your source, the signEdje can automatically scale the content to match your output target up to 1080i60 for outstanding HD playback. The signEdje can easily be configured using the included web-based control application.

Ad-insertion Solution

I) DPI-1200

Designed to concurrently insert up to twelve MPEG2 or AVC programs into a digital cable or television service, the DPI-1200 Ad Server offers the absolute highest transport standards required for broadcasting. The DPI-1200 imports programs to its core, processes and multiplexes them in preparation for their delivery via ASI output to a single or multiple ad splicer’s and seamlessly interfaces with Adtec's adVantage Enterprise Management Solution. The DPI-1200 interoperates with ad insertion systems from C-COR and SeaChange as well.

The adManage traffic and media management application is at the core of the Adtec enterprise management of commercial insertion systems. The application is optionally available to support Interconnects and provides schedule merging, verification splitting and detailed real time network analysis and alarms. The web based interface of adManage is ideal for local or remote access via any web browser. The SQL database provides rock solid stability and rapid access to real time system data. A full complement of user definable alarms provides notification via e-mail, text messaging, paging as well as visual alarming via the browser.